Name:     ID: 
 
    Email: 

Belt/Disc Sander Safety Test

True/False
Indicate whether the sentence or statement is true or false.
 

 1. 

Remove protective guards.
 

 2. 

Place stock securely on table when using the disc/belt sander
 

 3. 

Using the belt/disc sander at less than full speed can damage the machine.
 

 4. 

Forcing stock into the disc/belt sander produces the best results.
 

 5. 

Always sand on the upward spinning side of the disc sander.
 

 6. 

Only one hand needs to be dept on the stock when using the belt/disc sander.
 

 7. 

Never touch the disc or belt on the disc/belt sander, especially when the mahcine is being operated.
 

 8. 

Always wait for the machine to come to a complete stop before moving away from disc/belt sander.
 

 9. 

Continue to use the disc/belt sander if the disc or belt becomes extremely worn.
 

 10. 

Sand only outside, concave curves.
 

Multiple Choice
Identify the letter of the choice that best completes the statement or answers the question.
 

 11. 

The on and off switch is responsible for?
a.
Turning the disc/belt sander on and off.
c.
Providing a surface for the stock to rest upon.
b.
Securing the stock to the table.
d.
Sanding the stock.
 

 12. 

The downward spinning side of the disc sander is responsible for?
a.
Turning the disc/belt sander on and off.
c.
Providing a horizontal surface for thestock to rest upon when using the disc sander
b.
Sanding the stock when using the disc sander
d.
Nothing, Do not sand on this side of the disc sander.
 

 13. 

The belt sander is responsible for?
a.
Turning the disc/belt sander on and off.
c.
Providing a horizontal surface for thestock to rest upon when using the disc sander
b.
Sanding the stock
d.
Nothing, Do not sand on this side of the disc sander.
 

 14. 

The upward spinning side of the disc sander is responsible for?
a.
Turning the disc/belt sander on and off.
c.
Providing a horizontal surface for thestock to rest upon when using the disc sander
b.
Sanding the stock when using the disc sander
d.
Nothing, Do not sand on this side of the disc sander.
 

 15. 

The table is responsible for?
a.
Turning the disc/belt sander on and off.
c.
Providing a vertical surface for the stock to rest upon when using the disc sander.
b.
Providing a horizontal surface for the stock to rest upon when using the disc sander.
d.
Sanding the stock.
 

Matching
 
 
Rank the order of operations for the disc/belt sander.
a.
1
e.
5
b.
2
f.
6
c.
3
g.
7
d.
4
h.
8
 

 16. 

Move stock away from the disc/belt sander.
 

 17. 

Identify the downward feed side of the disc/belt sander
 

 18. 

Place stock flat against table on the downward feed side
 

 19. 

Constantly move stock against downward feed side to ensure quality of work
 

 20. 

Turn disc/belt sander on
 

 21. 

Wait until machine comes to a complete stop to move away from machine
 

 22. 

Gently feed stock into disc on the downward feed side
 

 23. 

Turn disc/belt sander off.
 



 
Submit          Reset Help